DA-36 is the universal solution to the eternal problem of distributing a reference frequency from the central standard to several receivers. DA-36 is as standard designed for distributing 10 MHz standard frequency, but can be configured to drive any standard reference sine wave signal between 200 kHz to 16 MHz over any distance below 2 kilometers, from one room to another or from one building to another. DA-36 can be used for multi-point distribution by cascading several DA-36:s. (See DA-36 front panel on the picture.)

DA-35 is designed for multi-fiber distribution over any distance below 2 kilometers. DA-35 is modulary constructed, with plug-in cards to a rack backplane. There are two types of rack enclosures; one with 2 card slots, the opther with 10 card slots. Up to 36 fibers can be used and each receiver may have up to 40 outputs.

Low loss enabling long path lengths up to 2 km Lightweight, highly flexible small diameter cable Immunity to electrical interference, incl. stroke of lightning and EMP Non-conductive provides electrical isolation between transmitter and receiver module

DA-35 Modular Frequency Distribution Amplifier for Fiber Optics and Coax
DA-36 Frequency Distribution Amplifier for Fiber Optics and Coax

Last modified: 2008-03-19