Path Align-R(This page will soon be translated to French) The Path Align-R™ (mod 2220/2240) is an Antenna path alignment tester for microwave links. Because the Path Align-R™ directly drives the site's antennas, the optimization process is done without the need of the antenna site's radios, expensive and complex test equipment, ground technicians, on-site AC power, cell phones, two-way radios, etc. All that is required are the antennas themselves! The Path Align-R™ comes complete with everything needed to align a microwave link and communicate between sites. All you'll need to supply is the appropriate waveguide-to coax adapters and the antennas! The results of the antenna path alignment are logged into the Record-R™ internal memory. The Record-R™ contains an embedded GPS receiver, which provides accurate date/time and position information to be added to the frequency and path loss data. This logged data is saved in non-volatile memory for later transfer (download) to a PC where the data can be viewed, saved to disk and a hard copy printed or sent as an e-mail attachment over the Internet. A single front panel pushbutton activates the logging process. Up to 250 separate data records can be saved in the field for later download. Access to stored records is provided via USB or RS-232 connectors located on the rear panel.
2241 Path Align-R data sheet (108 kB) User Card 2220/2241 (107 kB) Path Loss & Fresnel Calculator (186 kB) Thesaurus - Wireless Supporting Information (194 kB) The code of Federal Regulations (102 kB)
This page is designed for Microsoft Internet Explorer 5.0 or later. |
